Q: What is a fire prevention system?

It’s important for workplaces to safeguard employees and property with fire protection, prevention systems. Buildings have what is called ‘fire load’—a term fire protection professionals use when determining the potential severity of a fire in a building based on the presence of certain hazards—and fire prevention systems are put in place to keep a building’s fire load as low as

Question 1

What is an example of a fire hazard audit?

Accepted Answer

Fire hazard audits, more popularly known as fire safety audits, focus on examining the area for problems that may impede fire safety. This means checking to make sure the organization is code compliant with fire protection regulations that take care of fire alarms, sprinkler systems, firefighting equipment, emergency protocol, etc. These audits usually focus on questions such as: What do the

Question 2

Are flammable or combustible liquids hazardous to human health?

Accepted Answer

The short answer to this question is yes, both flammable and combustible liquids are hazardous to the health of humans due to the high possibility of igniting a fire or initiating an explosion. There can be other dangers associated with these chemicals as well if they are breathed in, ingested, or splashed onto the skin or eyes. Now that we&rsquo;ve established

Question 3

What are flammable and combustible liquids?

Accepted Answer

Many people assume flammable and combustible mean the same thing; however, they are strikingly different. These terms are used to describe the conditions in which dangerous liquids are likely to ignite. What&rsquo;s even more interesting is that it&rsquo;s not the liquid that burns, it&rsquo;s instead the vapors caused by evaporation that ignite. The National Fire Protection Association defines the differences between

Question 4

What are flammable or explosive limits?

Accepted Answer

Flammable or explosive materials are incredibly dangerous to workers. On top of that, these materials can exist in almost any environment whether that be in the construction industry, manufacturing, or in a commercial kitchen. There are some jobs that pose a higher risk of encountering these hazardous substances than others. Those whose job it is to enter confined spaces for equipment

Question 5

How are flammable and combustible materials an explosion hazard?

Accepted Answer

Flammable and combustible materials achieve explosive tendencies depending on two factors: the concentration of vapors or particles suspended in air as well as the presence of an ignition source, whether that be heat or a spark. However, the terms flammable and combustible are often used interchangeably when, in fact, there are some significant differences between the two as well as the

Question 6

What should be included in a fire safety plan?

Accepted Answer

Workplaces must have develop a written fire safety plan that essentially covers all of the procedures, systems, and actions that managers and employees must take in the event of a fire. Also known as fire prevention plans, it's important workers not only are aware of the plan, but are also trained on safety procedures to know how to properly respond

Question 7

What are some examples of fire protection measures?

Accepted Answer

Fires have the potential to be one of the most devastating events in the workplace if the right safety measures are in place. Implementing or installing standard fire protection systems is important to reduce the growth rate of fire to prevent additional injuries and property damage. Measures for Fire Safety Below are recommendations to consider when reviewing your company's protection measures: Fire

Question 8

What is a fire prevention system?

Accepted Answer

It&rsquo;s important for workplaces to safeguard employees and property with fire protection, prevention systems. Buildings have what is called &lsquo;fire load&rsquo;&mdash;a term fire protection professionals use when determining the potential severity of a fire in a building based on the presence of certain hazards&mdash;and fire prevention systems are put in place to keep a building&rsquo;s fire load as low as

Question 9

What should be included in fire safety training?

Accepted Answer

OSHA also encourages employers to train workers about potential fire hazards in the workplace and how to safely respond in the case of a fire emergency&mdash;everything from evacuation routes to using firefighting equipment. As part of OSHA&rsquo;s standard for fire prevention plans, employers are required to inform employees of the fire hazards they will be exposed to upon initial assignment to

Question 10

What does AHJ stand for?

Accepted Answer

AHJ stands of the authority having jurisdiction. The AHJ is not a single entity. NFPA defines AHJ as &ldquo;an organization, office, or individual responsible for enforcing the requirements of a code or standard, or for approving equipment, materials, an installation, or a procedure.&rdquo; AHJs do not implement or publish new laws. Instead, the primary role of an AHJ is to

Question 11

What is a flashpoint?

Accepted Answer

A flashpoint is the lowest temperature at which the vapors of a volatile material can ignite. This is an important factor when evaluating safety precautions in any area where flammable materials are used. In many factories great care must be taken to ensure the temperature never approaches the flashpoint of various materials or it could cause serious dangers. Measuring Flashpoint When working

Question 12

What is a fire safety plan?

Accepted Answer

A fire safety plan is a strategy that is implemented in a facility that provides information about what to do to prevent fires, and how to respond should one occur. Of course, individual homes can also have fire safety plans, but when referring to the formal concept it is almost always going to be referencing a workplace situation. In most

Question 13

What does IFC stand for?

Accepted Answer

IFC stands for International Fire Code. The latest version is the IFC-2018, which serves to provide individuals and companies with the minimum level of safety guidelines for all new and existing structures. This set of standards also provides guidelines for processes on how things should be done to help reduce the risk of fires and keep people safe. The IFC

Question 14

What does FR stand for?

Accepted Answer

When it comes to workplace safety, FR stands for flame resistant, or in some cases, flame retardant. These two terms are often used interchangeably, but they actually have two different, but related, meanings. Understanding what each of these phrases means, and how they should be used in the workplace, will help to improve overall safety. Flame Retardant The term flame retardant refers

Question 15

What does FR mean?

Accepted Answer

In the world of personal protection equipment and workplace safety, the acronym &ldquo;FR&rdquo; stands for either flame resistant or flame retardant. When specifically referring to FR clothing, it will mean flame resistant. These clothes were designed and specially treated in order to help keep them from catching fire, or remaining on fire, so that the person wearing them will be

Question 16

How can visual cues affect fire safety?

Accepted Answer

Visual communication is an extremely helpful tool for workplace fire safety. With the help of these tools, employees will be able to acknowledge and practice proper safety measures in the facility, strengthen the overall safety in the facility, and even improve emergency preparedness. Those outcomes should be high on the list of priorities within a company. However, visual communication always

Question 17

Is FR clothing considered PPE?

Accepted Answer

Personal protective equipment (PPE) consists of gear that an employee is required to wear depending on the work environment that he or she is in. To determine what kind of PPE is required in a particular workplace, a risk assessment must be completed. Employees may be required to wear hard hats, gloves, goggles, steel-toed boots, or fire safe PPE. Fire

Question 18

Are fire alarms required by OSHA?

Accepted Answer

Fire alarms and detectors are essential to keeping employees safe in the workplace. Once alarms are set off, the occupants are alerted that a fire is present and subsequent action must be taken immediately. This can either be fighting the fire with fire protection equipment like fire extinguishers, or safely exiting the building. An emergency response team will be required

Question 19

Should fire drills be conducted?

Accepted Answer

OSHA does not require fire drills to be implemented at work, however they are highly encouraged and recommended. Even though fire drills may not be required by OSHA, they may well still be required by the state, local jurisdictions, or insurance providers to make sure there&rsquo;s a safe evacuation plan for the building&rsquo;s occupants. The frequency at which companies should perform

Question 20

Which fire extinguisher is used for electrical fire?

Accepted Answer

There are different types of fire extinguishers that are used for different kinds of fires and all of them are highly dependent on what kind of material is being burned. In the case of electrical fires, also known as energized electrical fires, a class C fire extinguisher is needed to put it out. If this kind of fire occurs the

Question 21

What colors should be used for fire related signs?

Accepted Answer

ANSI defines red as the color used for any safety signs or labels that signify danger, the color that marks fire protection equipment, and the color that indicates the need to stop. ANSI is not an institution that can enforce rules. The entity is merely a non-profit that supervises standards made for services, processes, produces, systems, and personnel that are

Question 22

Are fire sprinklers required?

Accepted Answer

Fire sprinklers are considered an active fire protection method because they directly fight fires in emergency situations. With more fire sprinkler systems being used today in various different buildings, rather than solely factories and large commercial buildings, the statistics show that 96% of fires have been controlled by sprinklers alone. There are a number of factors that influence the matter of

Question 23

How many fire extinguishers should a workplace have?

Accepted Answer

Fire extinguishers are essential in every building no matter what kind of work takes place there. When considering where they go and how many you need, the NFPA 10 regulation specifically states that fire extinguishers should be placed in spots that easily accessible and visible in case of an emergency. For example, they can be placed along a regularly traversed

Question 24

Why is fire safety education and training important?

Accepted Answer

Fire safety education and training is not only required by law, it&rsquo;s also an extremely important skill to obtain regarding the safety of employees and others who might be in the building. Fires are damaging to property, cause injury or death, and can even eliminate jobs since many buildings destroyed by fire are not rebuilt. The way to prevent these

Question 25

Who can give fire safety training?

Accepted Answer

Basic fire safety training is required by law for all employees in most workplaces. This includes warehouses, storage facilities, manufacturers of various materials etc. As for the question of who can administer that training, it falls on the shoulders of an individual who is seen as competent in fire safety. This is a person who has suitable skills and a

Question 26

What is fire protection?

Accepted Answer

Fire protection refers to the steps that a company takes to prevent fires from becoming destructive to the point of requiring costly repairs. Whether these costs are seen as human injury and death or large amounts of property loss from an uncontrollable fire, each company should strive to invest in some sort of fire protection initiative to prevent these damaging

Question 27

What is a fire safety inspection?

Accepted Answer

The fire department is the entity that performs annual fire inspections. These inspections point out risks and hazards in the facility, which are noted at the end of a report to be remedied by employers. How this inspection is completed, when it is completed, and what it&rsquo;s done for may vary depending on the city regulations, the local jurisdiction, and

Question 28

What are fire risks in a factory?

Accepted Answer

The NFPA recorded around 499,000 structure fires in 2018. Compared to the 1,098,000 that were recorded in 1977 when the NFPA first began recording the amount of structure fires, this looks much better from an improvement standpoint. Out of those structural fires there were about 11,000 that were industry related. The property loss and damages were worth about $508 million.

Question 29

What are fire risks in an office?

Accepted Answer

According to 2017 statistics, there were around 18,000 fires that started in offices and stores resulting in 778 million dollars of property loss. The top five fire risks that exist in many offices can be avoided if the appropriate precautions are taken. Those five most common office fire risks are as follows: Overloaded electrical sockets This is usually caused by too

Question 30

What are fire risks in a warehouse?

Accepted Answer

Fire risks in warehouses cover much of the same concerns as industrial building fire risks except for the fact that warehouses often have a much higher possibility of potential fuel lying around. Warehouses currently are often larger than 10 football fields and store items on racks up to 100 feet tall. That is an enormous amount of potential fuel for

Question 31

How often should fire safety trainings be given?

Accepted Answer

Fire safety trainings should be given at least once a year, not only because everyone needs a refresher but also because fire safety certificates expire. Employers can go over fire safety and provide training when the workplace is the least busy so all the staff can participate. Fire safety training usually involves: Alarm systems Evacuation plans Reporting procedures Shutdown procedures

Question 32

What organization is involved with fire safety regulations?

Accepted Answer

The organization that is involved with fire safety regulations is the National Fire Protection Association (the NFPA). This group is an international non-profit organization that is devoted to helping eliminate fire and electrical hazards that most often result in death, property damage, and severe injury. About the NFPA Founded in 1896, the NFPA has published more than 300 consensus codes and standards

Question 33

What is a fire risk assessment?

Accepted Answer

A fire risk assessment is very similar to a normal risk assessment but it just focuses on fire safety instead of chemical and other physical hazards in the workplace. With a fire risk assessment, there must be one person who is responsible for keeping everything up to date. This includes ensuring the correct safety practices are upheld, completing the fire

Question 34

What are fire safety regulations and standards?

Accepted Answer

There is a list of fire safety regulations made by the National Fire Protection Agency (NFPA) that exist to maintain safe conditions in the workplace. These regulations make a point that prevention is the first step against accidents that may involve fires. If every regulation is upheld there is a significant decrease in risk of workplace accidents since they cover

Question 35

What fire safety equipment should I have in my facility?

Accepted Answer

One of the most important things OSHA focuses on is fire prevention in the workplace. Due to this, OSHA has a set of standards which help employers reduce the risk of fire and ensure employee safety (see section 1910.39 for fire safety compliance). A fire prevention plan is required if there is 10 or more employees, as well as training

Fire Safety Questions and Answers

Topics Covered

Fire Safety Questions and Answers